RAVENOL REP Racing Extra Performance SAE 5W-30Have a question about this product? Ask us!
RAVENOL REP Racing Extra Performance SAE 5W-30 is a modern, fully synthetic, fuel-saving, low friction multigrade engine oil. This oil is not only impressive as a result of its low sulphate ash content; it also has reduced HTHS viscosity for measurable fuel savings.
RAVENOL REP Racing Extra Performance SAE 5W-30 therefore contributes to reducing emissions and protecting the environment. It is extremely well-suited to modern petrol engines for car racing, even when subject to the highest levels of strain.
As a result of its special additives using tungsten, RAVENOL REP Racing Extra Performance SAE 5W-30 is also suitable for extremely sporty driving styles. It provides a safe layer of lubrication, even at very high operating temperatures. RAVENOL REP Racing Extra Performance SAE 5W-30 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving mechanical efficiency. Extensive protection against corrosion (oxidation) and foaming.
RAVENOL REP Racing Extra Performance SAE 5W-30 can be used as special oil for car race even under most difficult conditions.
API SN, ACEA C3
MB-Approval 229.51, MB-Approval 229.52, Renault RN0700/RN0710, GM dexos2™, BMW Longlife-04, License: API SN
Practice and tested in aggregates with filling
MB 226.5, Race Partnerships: Nürburgring Tested, Hockenheim Premium Partner, Recommendation of Ralf Schumacher
RAVENOL REP Racing Extra Performance SAE 5W-30 offers:
- Ultra-modern fully synthetic engine oil for car race with special tungsten additivation
- Fuel saving regarding partial load operation and full power operation
- Very low evaporation tendency
- Very stable and excellent viscosity behaviour
- Very good cold start characteristics
- Safe lubricating layer at very high operating temperatures
- Very good detergent and dispersant characteristics
- Good protection against corrosion and foam formation
|Density at 20°C||kg/m³||848,0||DIN 51757|
|Viscosity at 100°C||mm²/s||12,2||DIN 51562|
|Viscosity at 40°C||mm²/s||73,4||DIN 51562|
|Viscosity index VI||165||DIN ISO 2909|
|HTHS at 150°C||mPа*s||3,7||ASTM D5481|
|CCS Viscosity at -30°C||mPa*s||4301||ASTM D5293|
|Low Temp. Pumping viscosity (MRV)||mPa*s||14.870||ASTM D4684|
|Pourpoint||°C||-60||DIN ISO 3016|
|Noack Volatility||%||6,2||ASTM D5800/b|
|Flash point||°C||244||DIN ISO 2592|
|TBN||mg KOH/g||8,1||ASTM D2896|
|Sulphated ash||%wt.||0,8||DIN 51 575|
All indicated data are approximate values and are subject to the commercial fluctuations.PDF Download