RAVENOL VMS SAE 5W-30 is fully synthetic low friction motor oil with CleanSynto® technology for Daimler passenger car petrol and diesel engines with and without turbo-charging and direct injection. Minimisation of friction, abrasion and fuel consumption, excellent cold start characteristics. Extended oil change intervals according to manufacturer’s recommendations.
The excellent cold start characteristics provide optimal lubricant safety in the cold-running phase. Because of the noticeable fuel economy RAVENOL VMS SAE 5W-30 contributes the reduction of pollutant emissions and protecting the environment. RAVENOL VMS SAE 5W-30 is Oil which prevents effectively the clogging of the diesel soot particulate filter.
RAVENOL VMS SAE 5W-30 is suitable for demanding motors as high performance low friction multi-grade gear oil. It is recommended for all modern passenger car gasoline and diesel engines, including turbo versions, for direct injection motors and it is also recommended for all operation conditions. RAVENOL VMS SAE 5W-30 is recommended for use in vehicles with diesel particulate filters. It is especially formulated according to the Daimler Low SPAsh multigrade service engine oil specification MB 229.52 and suitable for BlueTEC OM642.
API SN, ACEA C3
MB-Approval 229.51, MB-Approval 229.52, MB-Approval 229.31
Practice and tested in aggregates with filling
RAVENOL VMS SAE 5W-30 offers:
- Noticeable Fuel-Economy (FE)
- Low evaporation loss
- Excellent detergent and dispersant property
- Prevention of black sludge formation
- Improved cleaner engine
- Extended endurance because of oxidation stability
- Excellent cold start characteristics even at temperatures of below -30°C
- Excellent viscosity-temperature-characteristics
- Low evaporation tendency
- Suitable for catalysts
- Prevents effectively the reset of the diesel soot particulate filter
|Density at 20°C||kg/m³||844||EN ISO 12185|
|Viscosity at 40°C||mm²/s||71,6||DIN 51 562|
|Viscosity at 100°C||mm²/s||12,3||DIN 51 562|
|Viscosity index VI||171||DIN ISO 2909|
|Flash point (COC)||°C||236||DIN ISO 2592|
|Pourpoint||°C||-42||DIN ISO 3016|
|TBN||mg KOH/g||8,1||DIN ISO 3771|
All indicated data are approximate values and are subject to the commercial fluctuations.